|
|
Wood Working
Supplies: Table Hardware |
|
|
Alignment Pins and Table Top Fasteners
|
|
|
 |
|
Clinch Nut Plates
A speed adjustment screw lets you control the rate of descent. Support opens drop front to a maximum angle of 90°. They have nickel plated steel arms with umber colored plastic housing. |
|
|
 |
|
Corner Brackets for Table Aprons
Safe around children. Prevents lids from accidentally slamming shut on fingers. Measures approximately 5'' long pivot to pivot in extended position. Statuary bronze finish. |
|
|
 |
|
Desk Top Fasteners
Mount table legs easily with clinch nut plates and hanger bolts. Extra heavy gauge steel creates a solid assembly. Plates use a 5/16'' hanger bolt. |
|
|
 |
|
Solid Brass Table Keeper
Corner braces will make your table stronger. Available in Surface Mount and Kerf Mount. |
|
|
 |
|
Spring Loaded Insert
Two countersunk holes with 5/8'' centers. Supplied with 3/4'' - #6 FH screws. 3/4'' W x 1-5/16'' L steel. |
|
|
 |
|
Table Pins
This fork-style set is ideal for holding table leaves or halves together. This three-piece set has a horseshoe connector and two catch units with internal steel friction springs. 3-1/2'' Wide x 1-7/8'' D. |
|
|
 |
|
Table Top Eveners
Spring loaded insert allows leg to be rotated up to a half turn without loosening the joint. Insert requires 7/8'' hole and 12 mm hex key. Hanger bolt requires 5/16'' bit. |
|
|
 |
|
Table Top Fasteners
Hold table leaves or halves in perfect alignment. Brass pins are 5/16'' diameter. Wood and plastic pins measure 3/8'' in diameter x 1-1/4''. |
|
|
|
|
|
