|
|
Wood Working
Supplies: Hinges |
|
|
Special Application Hinges
|
|
|
 |
|
30 mm Easy Mortise Hinge
Resists rust, operates smoothly and has strength to spare. This innovative hinge combines the pivoting feature of a roto hinge with the strength of a hex head bolt. |
|
|
 |
|
Aximat Hinge
Side to side and front to back adjustability, as well as easy door removal. Mounting plates fasten behind top and bottom edges of door. Use on doors 5/8'' to 25/32'' thick. 140° opening. Requires 9mm hole. |
|
|
 |
|
Aximat Hinges
In your choice of brass or bronze finish, these 30mm mortise hinges are both a good value and easy to install. Ideal for folding doors. Open size is 11-5/16'' Long x 13/16'' Wide. |
|
|
 |
|
Blumotion for Soft-Close Cabinet Doors
A 270 degree swing and 1/4'' inside clearance team up for unbeatable cabinet access. Overlay hinge surface mounts on the cabinet and uses a 35mm mounting cup on doors - providing complete adjustability. |
|
|
 |
|
Butler Tray Table Hinges
Now pullout accessories and shelves won’t be blocked by the door. A 270° swing and 1/4" inside clearance team up for unbeatable cabinet access. |
|
|
 |
|
Butterfly Hinges
Blumotion for doors with self-closing hinges features innovative design that senses how hard the cabinet door is being closed, then adjusts resistance to keep it from slamming shut. |
|
|
 |
|
Caf Door Hinges
Butler Tray Table Hinges have a steel spring, are made of solid brass, and stops at a 90° angle. 1-1/2'' wide. 81266 and 81258 are 2-1/2'' long. 606 is 2-7/8'' long. |
|
|
 |
|
Concealed Soss Hinges
Butterfly hinges are made of solid brass. Available in 1-5/16'' x 2-1/4'' and 1-3/4'' x 3''. |
|
|
 |
|
Double Action Hinges
Doors swing open so freely that you can walk through them with both hands full. Steel with a polished brass finish. Use on 3/4'' to 1-3/4'' stock. |
|
|
 |
|
Double Locking Bi Fold Door Hinge
Wings on #26518 measure 3/8'' W x 1- 11/16'' L. Wings on #26526 measure 1/2'' W x 2-3/8'' L. Wings on #83577 measure 1'' W x 4- 5/8''. |
|
|
 |
|
Exterior Shutter Hinges
Choose from shutter hinges, New York style shutter hinges for wood frame or brick construction, shutter dogs and shutter bolt. |
|
|
 |
|
Five Position Adjustable Supports
Great for shutters, screens, bar doors or any area with a lot of in and out traffic. Brass plated steel. Use on 3/4'' or 1- 1/8'' stock. |
|
|
 |
|
Flange Hinge
Automatically locks flat, so doors remain open, or locks shut when doors are folded to eliminate bounce back. Minimum stile width is 1-1/8''. Hinge measures 2-1/2'' square. |
|
|
 |
|
Folding Door Hinge
Great for applications from garden chairs to adjustable bed frames. Plus writing desks and more. Just lift into place and the supports stops in five pre set positions. Left or right hand installation. |
|
|
 |
|
Full Back to Back Wrap Around Hinges
Hinge has wrap around flange that gives you extra support. Great for lighter lids on stereo cabinets and toy boxes. Leaves only a 1/16'' gap under the lid. Brass plated steel. Use on 3/4'' material. Opens to 195°. |
|
|
 |
|
Fully Adjustable Concealed Fall Flap Hinges
Fully adjustable from no gap to 1/8''. Get the fit you want with these durable die cast hinges made especially for folding doors. Panels will always be flush. Features 35mm cup style mounting. |
|
|
 |
|
Hidden Barrel Hinges
These back to back wrap around hinges are the utmost in stability. Leaves wrap around the back of the door and frame to handle heavy loads. Excellent choice for plywood doors. Hinges have a 1-1/2'' long fixed pin barrel. |
|
|
 |
|
Institutional Hinges
Permits drop front to travel 90° to produce a flat surface flush with the cabinet bottom. Requires 35mm by 12mm deep holes. Plated steel. |
|
|
 |
|
Interior Shutter Plan and Hinges
Choose from Plantation shutter plan, outerpanel butt hinge, interpanel butt hinge, wrap-around hinge, shutter pin pack, 5/8" solid brass knob set, 1" porcelain knob set and magnetic catches. |
|
|
 |
|
Invisible Link 180° Hinge
Hidden Barrel Hinges are made of solid brass with brass plated steel connecting links. 10mm on 1/2'' stock, 12mm on 5/8'' stock, 14mm on 3/4'' stock, 18mm on 1'' stock, 24mm on 1-1/4'' stock. |
|
|
 |
|
KnockIn Lift Off Hinges
Made of heavy-duty 13 gauge steel. Full overlay hinges are 2-3/4'' high and will provide a 270 degree opening on frameless cabinet construction. Inset hinges are 2'' high and will provide 180 degree opening. |
|
|
 |
|
Long Barrel Finial Hinge Set
Hinge is mortised into the edges of the door and cabinet. Totally concealed from view when doors or leaves are closed. Allows a close fit (only 1/32'' gap) between the door and frame. |
|
|
 |
|
Non Mortise Institutional Hinge
Create an ''old-style'' look with these easy-to-use hinges. Simply drill holes, knock in and twist for adjustment — then lift your door on. Available in two sizes. |
|
|
 |
|
Overhead Bin Hinge
Great for armoires with large doors or small cabinets. Easy to install 35mm cup hinges have an extended barrel and finial tips. Use for overlay doors. Antique bronze finish. 15-1/8'' long. |
|
|
 |
|
Parliament Hinges
Get easy installation and squeak-free operation with these 3-knuckle non-mortise hinges. No mortising is required simply screw on. The design of this hinge even helps reduce the gap between cabinets by 1/4''. |
|
|
 |
|
Precision Knife Hinges
Lifts and locks doors open at 75 degrees. Drop-down doors stay securely upright until you raise the door slightly to release the lock. Surface mounted 1/2'' overlay hinge. |
|
|
 |
|
Reversible Knife Hinges
These traditionally-styled hinges feature a single pin and bypassing leaf design-meaning that mortising is required on the cabinet only. |
|
|
 |
|
Sepa Solid Brass Concealed Hinges
Precision knife hinges are made of solid, polished brass. 1/8'' thick. Straight style for overlay doors. |
|
|
 |
|
Solid Brass Sewing Machine Hinge
Door must be inset to the top and bottom of the cabinet, and can be overlay or inset to cabinet side. Steel with a statuary bronze finish. |
|
|
 |
|
Stay Closed Wooden Door Pivot
Because Sepa hinges are mortised into both the door and the cabinet, they are invisible both inside and outside the cabinet. With 180 ° opening angle and vertical adjustment up to 7/32". |
|
|
 |
|
Surface Mounted Hinge
These simple yet elegant hinges are great for drop front desks as well as sewing machines. Choose from Solid Brass (left) or Antique English finish (right). Each measures 1-1/4'' wide by 3-1/8'' long. |
|
|
 |
|
Twin Pin Sewing Machine Hinges
Eliminates the need for catches. These easy to install hinges will keep doors closed without catches. Minimum door thickness necessary is 5/8''. |
|
|
 |
|
Universal Connector Hinge
A 90° stop holds lids in a secure upright position, which is perfect for hampers and boxes. Spring-closing overlay hinge. |
|
|
|
|
|
